Screwdriver Set with Magnetic Tips - Phillips and Slotted - 6 Pieces
(0 reviews)
Price: $20.53
In Stock
Screwdriver Set with Magnetic Tips - Phillips and Slotted - 6 Pieces
Item # PT82VR
Retail:$28.86
Our Price: $20.53
You Save: 29%
In Stock
- All Info
- Q & A (0)
- Videos (2)
- Photos
Performance Tool Hand Tools - PT82VR
- Flat Head Screwdrivers
- Phillips Screwdrivers
- Screwdrivers and Nut Drivers
- Performance Tool
- Alloy Steel
- Screwdriver set with comfortable, non-slip molded grips
- Chrome-vanadium steel
- Magnetic tips
- Contents: 1/8" x 3" slotted, 3/16" x 3" slotted, 1/4" x 4" slotted, #0 x 2-1/2" Phillips, #1 x 3" Phillips, and #2 x 4" Phillips
W30896 Performance Tool Screwdriver Set - 6 Pieces
Video of Screwdriver Set with Magnetic Tips - Phillips and Slotted - 6 Pieces
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Performance Tool Tools - Hand Tools - 6 Piece Screwdriver Set - PT82VR
Jeff: Hello, everybody. This is Jeff at @trailer.com. Today we're going to take a look at this Six Piece Slotted and Phillips Screwdriver Set with the Magnetic Tips. Now this screwdriver set uses a nice comfortable non-slip molded grips on the screwdriver. The screwdriver itself is a chrome-vanadium steel construction and they do have the magnetic tips on them. It comes with six different sizes.We'll start with the slotted set, there's three different sizes over here.
The largest size is the 1/4". That's the width of the screwdriver blade, so that's a 1/4". And the length of it is right at 4" to the tip. Next size is a 3/16" width on the slotted tip and the length of that is 3". And the smallest is 1/8" wide on the tip and the length is right at 3".And if we move to the Phillips screwdriver, the largest one is a #2 size and the length of that is right at 4" to the tip.
The next one is the #1 size Phillips and the length of that one is right at 3" to the tip. And then the smallest is a #0 size Phillips and the length on that is right at 2 1/2". But that should do it for the review on the Six Piece Slotted and Phillips Screwdriver Set with the Magnetic Tips..
0
0
See what our Experts say about this Performance Tool Hand Tools
- How To Remove The Cover On An Older Atwood LPCO DetectorThe cover to your Atwood Model LPCO just snaps to the mounting base, so to remove it you can use a flathead screwdriver like in the kit # PT82VR or something similar, and pry in, up and out around the edges to remove the cover. Once the cover is removed, you can use a Philips head screw driver also in the kit # PT82VR to unscrew the base from the wall to access your wiring. For a replacement I recommend taking a look at the: -Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681. This...
view full answer...
Info for this part was:
Installed by:
Jeff D
Installed by:
Shane H
Video Edited:
Joshua S
Written by:
Matthew S
Edited by:
Daron K
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.